A fan coil unit is simply a device
consists of heating and cooling oil. Fan coil units traditionally contain their
own thermostat so it can cool itself down when it gets to hot. The fan coil
works by cooling the air in the room side unit and absorbing the heat energy by
the refrigerant. The refrigerant is then pumped as gas in lines to the external
condenser. The Condenser cools the refrigerant by drawing air across the coil
and condensing it into liquid.Due to their simplicity, fan coil units are more
economical to install than ducted or central heating systems with air handling units. However, they can be noisy because the fan is
within the same space.
However I am
sure you guys have heard about Air Handling Unit (AHU) also. AHU is basically
referred to as a generic term for anything or any device which is involved in
the transportation, heating or cooling of air. After the heating or cooling of
the air, the air stream is moved forward or directed to the required placed
through air ducts which include rooftop units and furnaces. But there a petite
difference between AHU and FCU. The fan coil units are smaller and
self-contained than the AHU's. And the major difference between AHU and FCU
lies in the fact that in FCU's there is no ducting involved for the movement of
air. In the FCU's the fan in the internal section of the FCU carries out the
function of moving the air over a heated or cooled coil and then directly
moving out the air into the surrounding air without the use of any ducts. The FCU's can also be used in the case of water
also where as AHU's deal with air only.
Gulf
Airconditioning Manufacturing Industries (GAMI)
is one of the largest manufacturer and distributor of Fan Coil Units in the
middle-east. They are the leading manufacturing and distributors in various
product like AIR COOLED SCREW CHILLER
, MODULAR AHU
, MONOBLOCK AHU ,
PACKAGED AC
, FAN COIL UNIT.
They are ISO 9001-2008, ISO 14001-2004 & OHSAS 18001-2007 Certified Company
for quality, health, safety and environment management programs.GAMI is a
member of GIBCA Group of Companies.
GAMI manufactures high
quality, efficient and technically advanced Chilled Water and packaged
airConditioning equipment for GCC & international markets.
The FCU in GAMI is made
from 1.0 mm thick galvanized (G90) Steel sheet. It has a Drain Pan also made
from 1.0 mm thick galvanized (G90) Steel sheet, polyester powder coated for
corrosion resistance.
The cooling coil is
separately designed for standard/district cooling chilled water Applications.
The Fan is centrifugal double inlet double width, forward curved, balanced to
avoid noise and increase efficiency.
The Fan motors
are provided with 5 speeds. Factory pre-selected and pre-wired to the terminal
block fr 3 speeds – high, medium, low. The best part is the air filter which is
designed havefactry installed permanent and washable aluminium filters.